|| Gryphon's Home Page || N6RFM Home Page ||

|| End of Log||

• drain and flush holding tank                                                       
• draw anti-freeze into PHFII inlet (3/4/" ID hose)                        
• bypass hot water heater (1/2" hose jumper with male adapters)  
• drain hot water heater                                                                
• drain forward and mid-ships water tanks                                    
• empty hot and cold water lines going to head sink, galley sink and deck shower
• add 2 gallons of AF to forward tank, allow to drain into cabin tank
• flush water lines with AF                                
• add 2 more gallons of AF to cabin water tank
• flush water lines with AF                                
• drain water filter under sink                            
• leave all spigots open                                     

• pump out engine oil                
• change oil filter                       
• replace engine oil (15-40W)   
• top off transmission oil (30W) 
• run engine briefly                    
• look for serviceable anodes on block and manifold 
• inspect air filter element                           
• flush bilge with fresh water                       
• pump out and dry bilge sump and add AF

• winterize Yanmar by drawing 3 gallons AF in via intake line (5/8" ID hose)
• empty raw water strainer 

|| Gryphon's Home Page || N6RFM Home Page ||